Speaker type: 50” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor. . XMAX: . Principle: Sealed/ Passive. Recommended amp:

Speaker type: 32” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor. . XMAX: . Principle: Sealed/ Passive. Recommended amp:

Speaker type: 24” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor. . XMAX: . Principle: Sealed/ Passive. Recommended amp:

Speaker type: 21” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor. XMAX: 17.5 mm excursion each direction (35 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion. Principle: Sealed/ Passive. Recommended amp: 1Ch DSP and 1CH amplifier are required. Min. recommended amplifier: 109 Vrms, 154 Vpk, 27.3 A; equivalent to 3000 W @ 4 Ω with correct RMS & peak limiter settings.

Speaker type: 2 x 18” forward-firing, advanced carbon Rohacell® composite sandwich cones, neodymium motor with 4” ultra-high-temperature voice-coil.
XMAX: 23 mm excursion each direction (46 mm linear), voice coil remaining in homogeneous magnetic field, linear and lowest distortion.
Principle: Sealed/ Passive.
Recommended amp: 1Ch DSP and 1 or 2Ch amplifier are required. Min. recommended amplifier: 89 Vrms, 126 Vpk, 45 A; equivalent to 4000 W @ 4 Ω, with correct RMS & peak limiter settings.

Speaker type: 18” forward-firing, dual gap motor structure - 2 inner and 2 outer voice coils, neodymium motor. XMAX: 17.5 mm excursion each direction (35 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion.
Principle: Sealed/ Passive.
Recommended amp: 1Ch DSP and 1Ch amplifier are required. Min. recommended amplifier: 72 Vrms, 102 Vpk, 18.0 A; equivalent to 1100 W @ 4 Ω, with correct RMS & peak limiter settings.

Speaker type: 10” time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 10'' woofer.
Tweeter: 1 ⅜” voice coil diameter, compression driver.
Power Handling: 500W at 8Ohms.

Speaker type: 10” time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 10'' woofer.
Tweeter: 1 ⅜” voice coil diameter, compression driver.
Power Handling: 500W at 8Ohms.

Speaker type: 12” Beryllium dome, time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 12'' woofer.
Tweeter: 3” voice coil diameter, Beryllium dome compression driver.
Power Handling: 900W at 8Ohms.

Speaker type: 6 ½” time-coherent point-source coaxial (Neodymium motor).
Principle: In Ceiling/ Passive.
Woofer: 6 ½” woofer.
Tweeter: 1” soft dome.
Power Handling: 200W at 8Ohms.

Le LX-NZ30 est un projecteur home-cinéma 4K UHD/HDR puissant doté de la technologie laser BLU-Escent. Grâce à la source lumineuse BLU-Escent, il atteint une luminosité de 3300 lumens, de sorte qu'il n'est pas nécessaire d’assombrir la pièce à chaque projection.

Le LX-NZ30 est un projecteur home-cinéma 4K UHD/HDR puissant doté de la technologie laser BLU-Escent. Grâce à la source lumineuse BLU-Escent, il atteint une luminosité de 3300 lumens, de sorte qu'il n'est pas nécessaire d’assombrir la pièce à chaque projection.

L'adaptateur de câble à deux voies vous permet de raccorder les Sonos Era 100, Era 300 ou Move 2 à votre routeur et de connecter une source audio avec un jack de 3,5 mm. Le câble auxiliaire et le câble Ethernet ne sont pas fournis.

L'adaptateur de câble à deux voies vous permet de raccorder les Sonos Era 100, Era 300 ou Move 2 à votre routeur et de connecter une source audio avec un jack de 3,5 mm. Le câble auxiliaire et le câble Ethernet ne sont pas fournis.

The SL Architect PAS SPL has an impressive operating dynamic range starting at 70 Hz (–3 dB) and extend to an impressive upper frequency response at 40 kHz. All matched with an exceptional sound pressure at 114 dB. Making the SL Architect PAS SPL a true all-rounder, fitting a large portfolio of applications. Sensitivity: 94 dB Max Power: 60 Watt Impedance: 4 ohms Dimensions (mm): H 300 • W 300 • D 153

Employing a single 10” long-throw woofer combined with the Artcoustic in-house designed 4th order bandpass technology, this subwoofer reproduces low frequency signals accurately and effortlessly, with high power handling and extremely low distortion. Operating Range: 35Hz to 120 Hz -3 dB 35Hz Sensitivity: 94 dB Max Power: 160 Watt
Impedance: 7 ohms Dimensions: H: 350 W: 350 D: 200 mm

Employing a 10” long-throw woofer combined with our in-house 4th order bandpass technology, this subwoofer reproduces low frequency signals accurately and effortlessly, with high power handling and extremely low distortion. Operating Range: 35Hz to 120Hz -3dB 35Hz Sensitivity: 94 dB Max Power: 160 Watt Impedance: 7 ohms Dimensions: H: 440 W: 440 D: 163 mm

Employing one 10-inch long-throw-woofer, combined with the Artcoustic in-house designed 4th. order bandpass technology, making this sub capable of reproducing low frequency signals accurately and effortlessly, with high power handling and extremely low distortion. Operating Range: 30 Hz (-3 dB) to 120 Hz Sensitivity: 96 dB Max Power: 160 Watt Impedance: 7 ohms Dimensions: H: 450 W: 450 D: 233 mm

The CPH-10 P is a single 10 inch, long-throw mid­-woofer design, enabling a bass response that extends well down to 40Hz. Indeed, the low frequency performance is the equivalent of speakers twice its size. Operating Range: 35 Hz (-3 dB) to 40 kHz
Sensitivity: 93 dB Max Power: 150 Watt Impedance: 7 ohms Dimensions: H: 400 W: 300 D: 141/153 mm

The CPH-5 is one of Artcoustic’s most versatile models. It’s slimline profile and powerful articulated performance make it the ideal choice for high-end Hi-Fi and multi-room audio installations, without the need for a subwoofer. Operating Range: 40 Hz (-3 dB) to 40 kHz Sensitivity: 90 dB Max Power: 100 Watt Impedance: 8 ohms Dimensions (mm): H 310 • W 230 • D 141/156