Speaker type: 12” forward-firing, advanced carbon Nomex® pulp mix cones, neodymium motor with 4” ultra-high-temperature voice-coil and triple shorting rings.
XMAX: 20 mm excursion each direction (40 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion.
Principle: Sealed Passive.
Recommended Amp: 1Ch DSP and 1Ch amplifier are required. Min. recommended amplifier: 60 Vrms, 84 Vpk, 15.0 A; equivalent to 900 W @ 4 Ω with correct RMS & peak limiter settings

Speaker type: 15” forward-firing, with 3” voice-coil. XMAX: 6 mm excursion each direction (12 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion.
Principle: Vented/ Passive.
Recommanded amp: 1Ch DSP and 1Ch amplifier are required. Min. recommended amplifier: 52.9 Vrms, 74.8 Vpk, 13.2 A; equivalent to 700 W @ 4 Ω, with correct RMS & peak limiter settings. Out Power: 1000W

Speaker type: 21” forward-firing, dual gap motor structure with 2 inner and 2 outer voice coils, neodymium motor. XMAX: 17.5 mm excursion each direction (35 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion. Principle: Sealed/ Passive. Recommended amp: 1Ch DSP and 1CH amplifier are required. Min. recommended amplifier: 109 Vrms, 154 Vpk, 27.3 A; equivalent to 3000 W @ 4 Ω with correct RMS & peak limiter settings.

Speaker type: 2 x 18” forward-firing, advanced carbon Rohacell® composite sandwich cones, neodymium motor with 4” ultra-high-temperature voice-coil.
XMAX: 23 mm excursion each direction (46 mm linear), voice coil remaining in homogeneous magnetic field, linear and lowest distortion.
Principle: Sealed/ Passive.
Recommended amp: 1Ch DSP and 1 or 2Ch amplifier are required. Min. recommended amplifier: 89 Vrms, 126 Vpk, 45 A; equivalent to 4000 W @ 4 Ω, with correct RMS & peak limiter settings.

Speaker type: 18” forward-firing, dual gap motor structure - 2 inner and 2 outer voice coils, neodymium motor. XMAX: 17.5 mm excursion each direction (35 mm linear), voice coil remaining in homogeneous magnetic field, linear and lower distortion.
Principle: Sealed/ Passive.
Recommended amp: 1Ch DSP and 1Ch amplifier are required. Min. recommended amplifier: 72 Vrms, 102 Vpk, 18.0 A; equivalent to 1100 W @ 4 Ω, with correct RMS & peak limiter settings.

Barre de son Devialet Dione, le son libéré. Barre de son active 120cm. 950 Watts RMS. 17 haut-parleurs intégrés dont 8 graves. Dolby Atmos. Un home cinéma tout-en-un. 2 orientations possibles

Barre de son Devialet Dione Opéra, l'art de vous transporter au cœur du spectacle. Barre de son active 120cm. 950 Watts RMS. 17 haut-parleurs intégrés dont 8 graves. Dolby Atmos. Un home cinéma tout-en-un. 2 orientations possibles

Speaker type: 10” time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 10'' woofer.
Tweeter: 1 ⅜” voice coil diameter, compression driver.
Power Handling: 500W at 8Ohms.

Speaker type: 10” time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 10'' woofer.
Tweeter: 1 ⅜” voice coil diameter, compression driver.
Power Handling: 500W at 8Ohms.

Speaker type: 12” Beryllium dome, time-coherent point-source coaxial.
Principle: Vented/ Passive.
Woofer: 12'' woofer.
Tweeter: 3” voice coil diameter, Beryllium dome compression driver.
Power Handling: 900W at 8Ohms.

Speaker type: 6 ½” time-coherent point-source coaxial (Neodymium motor).
Principle: In Ceiling/ Passive.
Woofer: 6 ½” woofer.
Tweeter: 1” soft dome.
Power Handling: 200W at 8Ohms.

MULTI-CHANNEL POWER AMPLIFIERS
8 Channel Ultra High Power Amplifier
- 8 x 200 W / 8 Ohms
- 8 x 400 W / 4 Ohms

MULTI-CHANNEL POWER AMPLIFIERS
16 Channel High Power Amplifier
16 x 200 W / 4-8 Ohms

The Evolve 1 is an impressive-sounding semi full-range speaker solution, packed with high-end finesse and an impressive dynamic range. 100 Hz (-6dB) to 20 kHz, Max Power: 30 Watt, Impedance: 8 ohms

l'Evolve 1-1 est parfait pour les petits systèmes de salon, ainsi que pour les canaux arrière dans les cinémas privés. 70Hz (-3dB) à 40Khz, Puissance maximale : 30 Watt, Impédance : 7 ohms

Operating Range: 70 Hz (-3 dB) to 40 kHz Max Power: 60 Watt
Impedance: 4 ohms Weight: 2.4 kg Dimensions: H: 200 W: 200 D: 72 / 82 mm

Enceinte pour pièces de petite à moyenne taille : home cinéma, Hi-Fi, multiroom. Impédance : 4 ohms. Puissance maximale : 90 watts. 94 dB. Réponse en fréquence étendue et plate jusqu'à 40 kHz.

The Evolve 1 was designed as a high-fidelity audio solution for multi-room interiors. Evolve 1 is available in our special IP66 outdoor surface material (weatherproof), making it one of the most aesthetically pleasing outdoor audio solutions, but it will also extend Artcoustic's high level of audio quality. Sensitivity: 94 dB Impedance: 4 ohms Max Power: 60 Watt Dimensions: H: 262 W: 120 D: 98 mm (depending on angle)

The current level input configuration of our high sound pressure level and modular SL network. Perfect for serious audio systems and home theatres. Sensitivity: 96 dB Max Power: 120 Watt Impedance: 4 ohms Dimensions: H: 370 W: 270 D: 72/82 mm

The entry to mid level configuration of our high sound pressure level and modular SL array. Perfect for serious audio systems and home cinemas, delivering higher dynamics and output than the 4-2 version. Sensitivity: 98 dB Max Power: 180 Watt Impedance: 5 ohms Dimensions: H: 370 W: 270 D: 72/82 mm